吊鉗牙板和卡瓦牙板
更新時間：2020-12-22點擊次數：3005次
我公司生產的各種吊鉗牙和卡瓦牙，均采用優質合金鋼制造，并經過化學熱處理，表面硬度高，心部硬度適宜，具有耐磨、抗蝕，使用壽命長的優點。
本公司還可根據客戶要求設計、制造各種特殊規格的牙板。
相關介紹
技術參數
| 適用的產品類型 | 適用管徑OD |
| ZQ100 Hydraulic pneumatic Tongs | 3 1/2-8 |
| ZQ50 Hydraulic pneumatic Tongs | 73-160mm |
| ZQ20 Hydraulic pneumatic Tongs | 2 1/2-3 1/2 |
| Q33/8-123/4/75 Drilling Tongs | 3 3/8-12 3/4 |
| Q22/8-103/4/35 Well Repair Tongs | 2 3/8-10 3/4 |
| Q133/8-251/2/35 Casing Tongs | 13 3/8-25 1/2 |
| TQ35 Hydraulic Casing Tongs | 5 1/2-13 3/8 |
| TQ16 Hydraulic Casing Tongs | 4-7 |
| TQ20 Hydraulic Casing Tongs | 4-13 3/8 |
| W-SDS Drill Pipe Slips | 2 3/8-4 1/2 |
| W-SDML Drill Pipe Slips | 2 3/8-5 1/2 |
| W-SDXL Drill Pipe Slips | 3 1/2-5 |
| ZC31/2-5 Drill Pipe Slips | 3 1/2-5 |
| ZC5-7 Drill Pipe Slips | 5-7 |
| W31/2/75（125）Slips for Drill Pope Running | 2 3/8、2 7/8、3 1/2 |
| W5/75（120、200）Slips for Drill Pope Running | 4、4 1/2、5 |
| WT Slips for Drill Pope Running | 4 1/2-11 3/4 |
| DCS-S Slips for Drill Pope Running | 3-4 7/8 |
| DCS-R Slips for Drill Pope Running | 4 1/2-7 |
| DCS-L Slips for Drill Pope Running | 6 3/4-14 |
| 8 Slips for Drill Pope Running | 8 |
| 9 Slips for Drill Pope Running | 9 |
| Casing Pipe Slips | 6 5/8-30 |
| WA-C Safety Pipe Slips | 3 1/2-15 5/8 |
| WA-T Safety Pipe Slips | 1 1/8-4 1/2 |
| YQ3 Oil Pipe Power Tongs | 60-89 |
| YQ6 Oil Pipe Power Tongs | 73-114 |
| YQ12 Oil Pipe Power Tongs | 73-141mm |
- 上一篇：已經沒有了
- 下一篇：定制牙板
首頁
產品中心
一鍵撥打
聯系我們